Paradox PDX-RPT1-Kit Alram Receiver Kit
Includes 1 x RPT1 & KIT1
The PDX-RPT1_KIT is a receiver kit. This Kit cmoes with receiver and KIT1.
Paradox metal enclosure and accessories kit. Suits all Paradox panels and modules and is supplied with battery, plug pack, tamper and telephone lead.
The Magellan RPT1 Wireless Repeater Module supports all Magellan transmitters and possesses a built-in transceiver which increases the range of wireless communications to 50-75 metres.
This kit comes with 1 x RPT1 Receiver and 1 x KIT1.
Note: The RPT1 is not supported by the RTX3 when connected to an EVO panel.
Feel free to ask any questions by dropping us a line or calling 1300 004 226
- Provision for multiple module and panel mounting
- Multiple punch-out holes for simple wiring
- Easy door removal
- Built-in transceiver (433MHz or 868MHz)
- Allows to extend the range of wireless communications
- Supports all MAGELLAN transmitters
- Select which zone, PGM and/or keypad signals are repeated
- Signal strength display
- Universal transmitter input (N.O./N.C.)
- In-field firmware upgrade via 307USB and WinLoad
|Dimensions: 28cm x 28cm 7.6cm|
|1 x 12VDC 7Amp battery|
|1 x 16VAC plug pack|
|1 x Telephone lead|
|Wireless range in a typical residential environment:
- 75m (240ft) with 433MHz;
- 50m (160ft) with 868MHz
|Compatible with MG5000, MG5050, MG6160, MG6130, MG6250 and RTX3|
|Note: The RPT1 is not supported by the RTX3 when connected to an EVO panel.|
|AC input (16Vac, 20VA)|
|Fits in 20cm x 25.5cm x 7.6cm (8in x 10in x 3in) and 28cm x 28cm x 7.6cm (11in x 11in x 3in) metal boxes|
|Unit Of Measure||ea|