Paradox PDX-ZX16PWR Alarm Expander Kit
16-Zone Powered Bus; PDX-ZX8 (x2) + PDX-KIT1 + PDX-PS817
The Paradox IC-PDX-ZX16PWR 16 zone expander kit is compatible with MG Series, SP Series, E Series and Digiplex EVO. It adds 16 zones to the existing panel and 12PGM outputs.
The 8-zone Expansion Module ZX8 is an interface between the control panels and any hardwired detection devices. The ZX8 connects to the control panel's combus to provide eight additional hardwired inputs and one 50mA on-board PGM output.
Paradox metal enclosure and accessories kit. Suits all Paradox panels and modules and is supplied with battery, plug pack, tamper and telephone lead.
The PS817 switching power supply automatically transfers to standby battery power in case of AC power failure. It works with gel-cell and lead acid batteries.
- 2 X ZX8
- 1 X PDX-KIT1
- 1 X PS817
Feel free to ask any questions by dropping us a line or calling 1300 004 226
Make 4 payments of $74.11 over 8 weeks and get it now!
- Compatible with MG Series, SP Series, E Series, and Digiplex EVO
- Adds 8 zones to existing panel
- 1 PGM output
- Use zone input as an anti-tamper switch input
- Provision for multiple module and panel mounting
- Multiple punch-out holes for simple wiring
- Easy door removal
- Battery fused at 5A (short condition protection)
- Jumper selectable battery charge current (350mA or 700mA)
- 4 mounting holes
- Dimensions: 5.75 x 7.5 x 2.75cm
|Input voltage: Typically 12 to 16 Vdc|
|Current consumption: 28mA|
|No. of outputs: One 50mA PGM|
|No. of inputs: 8 inputs|
|No. of zones: 8 standard zone inputs|
|Operating Temperature: -20ºC to 50ºC (-4ºF to 122ºF)|
|Dimensions: 28cm x 28cm 7.6cm|
|1 x 12VDC 7Amp battery|
|1 x 16VAC plug pack|
|1 x Telephone lead|
|Battery fused at 5A (short condition protection)|
|Jumper selectable battery charge current (350mA or 700mA)|
|4 mounting holes|
|Dimensions: 5.75 x 7.5 x 2.75cm|
|Unit Of Measure||ea|