Paradox PDX-ZX8 Alarm Expander
Compatible with MG/SP/E Series and Digiplex EVO; 8-Zone
The ZX8 is an Expander from Paradox. The Paradox PDX-ZX8 expander is compatible with MG Series, SP Series, E Series and Digiplex EVO. The 8-zone Expansion Module ZX8 is an interface between the control panels and any hardwired detection devices. The ZX8 connects to the control panel's combus to provide eight additional hardwired inputs and one 50mA on-board PGM output.
Feel free to ask any questions by dropping us a line or calling 1300 004 226
Make 4 payments of $26.60 over 8 weeks and get it now!
- Expansion of 8 additional zones
- Supports SP, MG and EVO
- 4-wire bus connection
- Firmware upgradeable
- 1 PGM output, 50 mA PGM
|Input voltage||Typically 12 to 16 Vdc|
|No. of outputs||One 50mA PGM|
|No. of inputs||8 inputs|
|No. of zones||8 standard zone inputs|
|Operating temperature||-20ºC to 50ºC (-4ºF to 122ºF)*|
|Compatibility||Any Digiplex or Digiplex EVO series control panel
Any SP Series control panel (V2.0 or higher)
Any MG5000/MG5050 control panels (V2.0 or higher)
WinLoad Software V2.03 or higher
NOTE: For 1728/1738 compatibility, refer to the SP-ZX8 instructions.
|Unit Of Measure||ea|