Takex TAK-PBIN100HF Photobeam

High performance intelligent Synchro-Quad SCEC

  • SCEC Approved
  • High/Low beam strength selection
  • Monitor jack for alignment via multi-meter
  • Audible alignment feature
  • 4 synchronised high-power beams with double modulation
  • 4 selectable transmission frequencies
  • Environmental monitoring circuit
  • Selectable 4-Channel Beam Frequencies
  • Double Modulated Beam for unsurpassed Light Immunity
  • Monitor Jack for alignment with Multi-Meter
  • Audible Alignment Tone
  • Environmental (anti-fog) Monitoring Circuit
  • Dynamic A.G.C. Circuit
  • Frost Resistant Cover

Product type

Photoelectric Beam Sensor

Detection system

Simultaneous breaking of 4 beams

Infrared beam

LED pulsed beam, Double modulation

Protection distance

Outdoor 100m (330ft) or less
Indoor 200m (660ft) or less

Max. beam range

Outdoor 1000m (3300ft) or less
Indoor 1000m (3300ft) or less

Response time

50msec. to 700msec. variable (Standard : 50msec.)

Supply voltage

12V to 30VDC (Non-polarity)

Current consumption

70mA or less at protection

Alarm output

Dry contact relay output 1c
Reset : Interruption time + off delay 
Contact capacity : 30V AC/DC, 1A or less

Environmental output

Dry contact relay output 1a or 1b (selectable)
Action : Output when weather conditions worsen
Contact capacity : 30V AC/DC, 1A or less

Tamper output

Dry contact relay 1b
Action : Activated when cover is detached
Contact capacity : 30V AC/DC, 1A or less

Alarm LED

Red LED (Receiver)
ON : when an alarm is initiated.

Attenuation LED

Red LED (Receiver)
ON : when beam is attenuated.

Functions

Modulated beam frequency selection (4-Channel)
Environmental module
Beam power selection
Alarm memory indication
Programmed AGC
Auto-gain lock function
Sound check : Audible check of beam level
Monitor jack output
Frost proof cover

Ambient temperature range

-35°C to +66°C (-31°F to +151°F)

Mounting positions

Outdoor (Perimeter protection)

Wiring

Terminals

Weight

Transmitter : 1200g (42oz)
Receiver : 1300g (45.5oz)

Appearance

PC resin (wine red)

 

iCam's SKU IC-TAK-PBIN100HF
Brand Takex
Shipping Weight 1.3000kg
Shipping Width 0.104m
Shipping Height 0.098m
Shipping Length 0.390m

Be The First To Review This Product!

Help other iCam Security Services users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

Takex TAK-PB4RTNS Reflective Beam

Takex TAK-PB4RTNS Reflective Beam

Flush Mount, Twin, System - 4m range

The TAK-PB4RTNS is a reflective beam from TAKEX that has 4m sensor effective range and separate processor unit - may be located up to 5m away.

$265.19

Make 4 interest-free payments of $66.30 fortnightly and receive your order now.

Takex TAK-PB10NSE PE Beam

Takex TAK-PB10NSE PE Beam

Indoor/Semi-outdoor Flush Mount, 10m Range

Takex Miniature / Covert Beams offer a discrete solution where surface mount product is unsuitable or unsightly. Perfect for window frames, door frames, bannisters etc, with a range of up to 10M these versat

$200.51

Make 4 interest-free payments of $50.13 fortnightly and receive your order now.

More From This Category

Takex TAK-PTS Thermostat Switch

Takex TAK-PTS Thermostat Switch

One Per Tower

The TAK-PTS is a thermostat switch that is used in conjunction with PTH heater units. The TAKEX PTS 12VDC thermostats operate at 8 degrees, we have found that in NZ there can be a lot of condensation at tem

$94.86

Make 4 interest-free payments of $23.71 fortnightly and receive your order now.

Takex TAK-PB4RTNS Reflective Beam

Takex TAK-PB4RTNS Reflective Beam

Flush Mount, Twin, System - 4m range

The TAK-PB4RTNS is a reflective beam from TAKEX that has 4m sensor effective range and separate processor unit - may be located up to 5m away.

$265.19

Make 4 interest-free payments of $66.30 fortnightly and receive your order now.

Takex PB-F 4-Stacked Photoelectric Beam Sensor

Takex PB-F 4-Stacked Photoelectric Beam Sensor

Long Range, Available in 50m or 100m

The Takex PB-F 4-Stacked Photoelectric Beam Sensor is especially designed for long range outdoor protection. Unique quad beams are synchronised to work together to reinforce the range and stability of the un

$669.44

Make 4 interest-free payments of $167.36 fortnightly and receive your order now.

See Options
Takex TAD 360deg Beam Tower

Takex TAD 360deg Beam Tower

360° viewing angle, Wall Mount, 1.5m, 2m, 3m

The TAK-TAD is a beam tower from Takex that comes in 360° viewing angle that comes in heights of 1.5m, 2m and 3m. With a 360° viewing angle the double sided towers are perfect for continual zones and corner

$1,256.95

See Options
Takex TAS 180deg Beam Tower

Takex TAS 180deg Beam Tower

180° viewing angle, 1.5m, 2m, 3m

The TAK-TAS is a beam tower from Takex that comes in 180° viewing angle and multiple heights from 1.5m to 3m. With a 180° viewing angle the single sided towers are perfect for either single zone or end zone

$1,012.24

See Options
Takex PBHF-KH Intelligent Quad Beam

Takex PBHF-KH Intelligent Quad Beam

Designed for TA Series Beam Towers

The Takex PBHF-KH is an intelligent quad beam designed specifically for use in the Takex TA Series Beam Towers. Unique Quad beams are synchronised to maintain range and stability in severe weather, while rej

$808.50

Make 4 interest-free payments of $202.12 fortnightly and receive your order now.

See Options
Takex TAK-NAM7R Reflective Beam

Takex TAK-NAM7R Reflective Beam

12-250V AC/DC Fast Response, 30cm - 7m Range

Complete with an IP66 rated enclosure, the industrial style NAM7R is suitable for harsh environments. It also features a self-switching AC and DC and self-regulating 24V DC to 240V AC power supply input. The

$168.17

Make 4 interest-free payments of $42.04 fortnightly and receive your order now.