Takex TAK-PR5B PE Beam

Low Cost Retro-Reflective

  • Cable only to one end: for applications where a beam break is desirable but wiring to both ends is impractical
  • Ideal for short distance protection across entrances and exits, corridors and staircases
  • Compact design for unobtrusive protection
  • Simple terminal arrangement for easy installation

Protection distance

5m (16.5ft) or less

Light source

Infrared light emitting diode

Response time

50msec. or more

Alarm Output

Dry contact relay output S.P.D.T. form C
Contact capacity: AC/DC30V, 0.5A or less

Supply voltage

10.5V to 26VDC (non-polarity)

Current consumption

37mA (at 12VDC)

Ambient Temperature range

-20°C to +50°C (-4°F to +122°F)

Mounting position

Indoor - entrance, exit, window, passageway

Weight

Sensor: 90g (3.2oz)
Reflector: 50g (1.8oz)

Appearance

ABS Resin (off-white)

 

iCam's SKU IC-TAK-PR5B
Brand Takex
Shipping Weight 0.0900kg
Shipping Width 0.050m
Shipping Height 0.050m
Shipping Length 0.050m

Be The First To Review This Product!

Help other iCam Security Services users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

Takex TAK-PIR30WE PIR

Takex TAK-PIR30WE PIR

PIR Quad/mirror/fuzzy logic, 30m x 30m

With a mounting height of up to 3.5m and a creep zone of less than 1m, the PIR-30WE series detector uses high quality mirrored optics coupled with twinpyros for high performance outdoor motion detection.

$1,028.41

Takex TAK-PIR50NE PIR

Takex TAK-PIR50NE PIR

PIR Quad/mirror/fuzzy logic, 50m x 3m

Using a combination of Quad Pyro sensors coupled with the highest quality mirror-optics, these detectors have been designed for the most demanding environments where quality and reliability matter. Both mode

$1,028.41

Takex TAK-PR11BE Reflective Beam

Takex TAK-PR11BE Reflective Beam

Indoor/Outdoor Reflective Beam 11m Outdoor/15m Indoor

The newly developed PR11BE is suitable for both indoor and outdoor use. It is the first reflector beam the security industry has developed for outdoor applications. As wiring is needed only on the sensor uni

$356.82

Make 4 interest-free payments of $89.20 fortnightly and receive your order now.

More From This Category

Takex TAK-PTS Thermostat Switch

Takex TAK-PTS Thermostat Switch

One Per Tower

The TAK-PTS is a thermostat switch that is used in conjunction with PTH heater units. The TAKEX PTS 12VDC thermostats operate at 8 degrees, we have found that in NZ there can be a lot of condensation at tem

$94.86

Make 4 interest-free payments of $23.71 fortnightly and receive your order now.

Takex TAK-PB4RTNS Reflective Beam

Takex TAK-PB4RTNS Reflective Beam

Flush Mount, Twin, System - 4m range

The TAK-PB4RTNS is a reflective beam from TAKEX that has 4m sensor effective range and separate processor unit - may be located up to 5m away.

$265.19

Make 4 interest-free payments of $66.30 fortnightly and receive your order now.

Takex PB-F 4-Stacked Photoelectric Beam Sensor

Takex PB-F 4-Stacked Photoelectric Beam Sensor

Long Range, Available in 50m or 100m

The Takex PB-F 4-Stacked Photoelectric Beam Sensor is especially designed for long range outdoor protection. Unique quad beams are synchronised to work together to reinforce the range and stability of the un

$669.44

Make 4 interest-free payments of $167.36 fortnightly and receive your order now.

See Options
Takex TAD 360deg Beam Tower

Takex TAD 360deg Beam Tower

360° viewing angle, Wall Mount, 1.5m, 2m, 3m

The TAK-TAD is a beam tower from Takex that comes in 360° viewing angle that comes in heights of 1.5m, 2m and 3m. With a 360° viewing angle the double sided towers are perfect for continual zones and corner

$1,256.95

See Options
Takex TAS 180deg Beam Tower

Takex TAS 180deg Beam Tower

180° viewing angle, 1.5m, 2m, 3m

The TAK-TAS is a beam tower from Takex that comes in 180° viewing angle and multiple heights from 1.5m to 3m. With a 180° viewing angle the single sided towers are perfect for either single zone or end zone

$1,012.24

See Options
Takex PBHF-KH Intelligent Quad Beam

Takex PBHF-KH Intelligent Quad Beam

Designed for TA Series Beam Towers

The Takex PBHF-KH is an intelligent quad beam designed specifically for use in the Takex TA Series Beam Towers. Unique Quad beams are synchronised to maintain range and stability in severe weather, while rej

$808.50

Make 4 interest-free payments of $202.12 fortnightly and receive your order now.

See Options
Takex TAK-NAM7R Reflective Beam

Takex TAK-NAM7R Reflective Beam

12-250V AC/DC Fast Response, 30cm - 7m Range

Complete with an IP66 rated enclosure, the industrial style NAM7R is suitable for harsh environments. It also features a self-switching AC and DC and self-regulating 24V DC to 240V AC power supply input. The

$168.17

Make 4 interest-free payments of $42.04 fortnightly and receive your order now.